Hot Spring ACE Cell Cleaner

Hot Springs Ace Cell Cleaner

Features:

• Specifically designed to clean the Salt Cell of the Hot Spring Ace salt water system.

Instructions:

1. Power off the hot tub: Ensure the safety by turning off the breakers at the electrical subpanel box near the hot tub. The ACE Salt Cell should not be handled unless the power to the hot tub is turned off.
2. Remove the ACE Cell:
   • Open the hot tub cover.
   • Remove the filter lid.
   • Unthread the gray cap through which the white cord of the ACE Cell passes.
   • Gently lift the ACE Cell out of the gray standpipe.
3. Clean the ACE Cell:
   • Place the Cell Cleaner on a solid surface near the ACE Cell. A spa step is recommended.
   • Carefully place the ACE Cell in the Cell Cleaner solution bottle.
   • Allow the ACE Cell to soak until no more bubbles are coming from it, for at least 10 minutes and no more than 12 hours. Note: Close the spa cover whenever leaving the hot tub unattended during cleaning.
   • Remove the ACE Cell from the Cell Cleaner bottle, ensuring no spills or drips. Note: Rinse any spills immediately to prevent damage.
   • Rinse the ACE Cell with water.
   • Inspect the ACE Cell for any visible scale build-up or damage. Repeat cleaning if necessary.
4. Install the ACE Cell in the filter standpipe:
   1. Insert it into the gray filter standpipe.
   2. Screw on the gray cap.
   3. Replace the filter lid.
5. Power on the hot tub according to the instructions in the Owner's Manual.
6. Properly dispose of the Cell Cleaner following the disposal instructions provided.